CONFAST 3/16" x 1-3/4" Hex Head Concrete Screw Anchor with Drill Bit for Anchoring to Masonry, Block or Brick (100 per Box)
4 sold in last 24 hours
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- SLOTTED HEX HEAD-Can be driven with a nut driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Tags |
Estimated shipping
Select a product to estimate shipping.Applications
The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Dry environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 1/4" nut driver is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 3/16".
Length Anchor
The length of the anchor is 1-3/4"
Thread Length
The length of the threads on the anchor is 1-3/4" in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4" to 3/4". This will ensure that the minimum embedment of 1" will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".
Spacing between Anchors
Each anchor must be spaced a minimum distance of 3" from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
| Main Specification | |
|---|---|
| 制造商 | CONFAST |
| 单位数 | 100 计数 |
| 尺寸 L x W x H | 3.5 x 3.5 x 4 inches |
| 外边完成 | Blue Ruspert |
| 金属类型 | 合金钢 |
| 标题样式 | Hex Washer |
| 线索覆盖 | 完全线程 |
| 品牌 | Confast |
| 头型 | 十六进制 |
| 刚果爱国者联盟 | 820274000250 |
| 快捷键类型 | self-tapping-taps |
| 直径 | 0.03 inches |
| 块数 | 100个 |
| 变速器大小 | 3/16 inch x 1-3/4 inch |
| 线索大小 | 1-3/4 inches |
| 材料 | Carbon Steel - Blue Coated |
| 颜色 | 蓝色 |
| 线索类型 | Un |
| 驱动系统 | External Hex |
| 项目重量 | 16盎司 |
| Product information | |
| 设置名称 | CONFAST 3/16" x 1-3/4" Hex Head Concrete Screw (100/Box) |
| Technical Details | |
| 编 号 | CSH316134 |
| 材料类型 | Carbon Steel - Blue Coated |
| 项目数 | 100个 |
| 线索样式 | 右手边 |
| 线索类 | Self-Tapping |
| 兼容的格鲁夫直径 | 0.16 Inches |
| 设置螺丝线索类型 | Unified National |
| Style | |
| 完成类型 | Blue Coated |
| Measurements | |
| 项目尺寸 | 3.5 x 3.5 x 4 inches |
| Others | |
| 产品类型 | Concrete Screws |
| 大小名称 | 3/16" x 1-3/4" |
| 螺丝头样式 | Hex Washer |
| 螺丝点样式 | diamond point-easier |