uxcell Die Stock Handle Wrench Set, M5 x 0.8 Threading Round Die and 20mm (Fit M3.5-M6 Dies) Holder Adjustable Wrench Hand Tool
12 sold in last 24 hours
- Die Stock Wrench Set: 20mm die stock fits M3.5-M6 dies, with adjustable screws. M5 x 0.8 threading round die with 20mm outside diameter, conical locking hole, strong locking and not loose. The round die has good abrasion resistance.
- Round Die: Suitable for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic. Used for threading mild steel, aluminum, stainless steel, cast iron, alloy steel and carbon steel. Fit for general purpose threading.
- Die Stock: Can help to repair broken bolts and threads or just remove bolts and threaded rod when used with round dies. With adjustable screws, it can securely hold round dies and is easy to operate. 45# carbon steel tool has high hardness, high strength and resistance to deformation than ordinary A3 steel.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. Necessary tools for hand tapping operation, can improve the efficiency of processing threads.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads. Good for maintenance and repair work.
Tags |
Estimated shipping
Select a product to estimate shipping.Information
When tapping, appropriate lubricating oil is good for cutting or cooling, making the cutting easier and faster, improving the smoothness and dimensional accuracy, and helping to extend the service life.
The following lubricants are recommended: steel - cutting oil, machine oil; pig iron - dry oil; aluminum - kerosene; stainless steel - mixed kerosene; hard plastic - dry oil. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.
Round Threading Dies
Can process, correct or clean external threads. For tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. NOT suitable for tile, concrete, walls, stone, etc.
Alloy Tool Steel Die
It has high hardness, wear resistance, high hardening capacity and tempering resistance. Great for maintenance and repair work on pipes, boards and machinery.
Alloy Tool Steel Dies
High hardness
Wear resistance
High hardening capacity
Tempering resistance
Tips
The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
When tapping, add suitable lubricating oil to the cutting edge, and repeat the operation 3-4 times until the thread length is obtained. When using by hand, pay attention to even force and avoid blind force.
Product details
| Main Specification | |
|---|---|
| 材料 | Alloy Tool Steel (Die) or 45# Carbon Steel (Wrench) |
| 制造商 | 电子手机 |
| 单位数 | 2 计数 |
| 标题样式 | 圆 |
| 项目长度 | 17.5 centimeters |
| 品牌 | 电子手机 |
| 项目数 | 2个 |
| 操作模式 | Mechanical |
| 项目包数量 | 页:1 |
| 颜色 | 银色 |
| Product information | |
| 设置名称 | Die Stock Handle Wrench Set |
| Technical Details | |
| 材料类型 | Alloy Tool Steel (Die) or 45# Carbon Steel (Wrench) |
| 制造商部分编号 | a22040300ux0327 |
| 计量标准 | 度量衡 |
| Item details | |
| 型号 | a22040300ux0327 |
| Style | |
| 完成类型 | 粉剂 |
| Others | |
| 产品类型 | Round Threading Dies |
| 包件数量 | 页:1 |