SABRENT USB 3.0 to 2.5in SATA Adapter Cable for SSD & HDD, UASP (EC-SSHD)
7 sold in last 24 hours
- 2.5" SATA Drives Only — SSD & HDD: Compatible with 2.5" SATA I/II/III SSDs and laptop HDDs. NOT compatible with: M.2 NVMe drives, M.2 SATA drives, 3.5" desktop HDDs, or slim SATA optical drives. Verify your drive has a standard 2.5" SATA connector before purchasing.
- USB Bus-Powered — No Adapter Needed for Most Drives: Powers most 2.5" SATA SSDs and laptop HDDs directly from USB. Note: Some older or high-capacity 2.5" mechanical HDDs may draw more current than a single USB port provides — if a drive fails to spin up, try a powered USB hub or a different USB 3.0 port.
- USB 3.0 (USB-A) — 5Gbps with UASP: Host connection is USB Type-A (USB-A). Computers with only USB-C ports require a separate USB-C to USB-A adapter (not included). UASP support for faster transfers on compatible systems.
- Plug & Play: No drivers required; hot-swappable design for quick access to drives on Windows, macOS, and Linux
- Usage Note: Not intended for all configurations such as system boot drives or certain embedded systems; compatibility may vary by device
- Enhanced Support: Firmware updates and Acronis True Image software are available for download on the Sabrent website, ensuring optimal performance and seamless data management.
Tags |
Estimated shipping
Select a product to estimate shipping.The SABRENT EC-SSHD lets you connect any 2.5" SATA hard drive or SSD to your computer through a standard USB port — no tools, no drivers, no wall adapter needed. Designed for data transfers, system migrations, laptop upgrades, and drive recovery. Compatible with 2.5" SATA I, II, and III drives.
Important before purchasing: This adapter supports 2.5" form factor SATA drives only. It is not compatible with M.2 NVMe or M.2 SATA drives. Most modern SSDs are M.2 form factor — if your SSD looks like a small circuit board (rectangular, with a notched edge), it is M.2 and will not work with this adapter. See the compatibility section below for full details.
COMPATIBLE: 2.5" SATA SSD (all brands, SATA I/II/III) · 2.5" SATA laptop HDD (7mm and 9.5mm height)
NOT COMPATIBLE: ✘ M.2 NVMe SSD · ✘ M.2 SATA SSD · ✘ 3.5" desktop HDD (requires 12V power) · ✘ Slim SATA optical drive · ✘ IDE/PATA drive
To confirm your drive type, look up the model number online — the spec sheet will list the form factor (2.5" or M.2) and interface (SATA or NVMe). If it says M.2 or NVMe, this adapter is not compatible.
OS Compatibility: Windows 10 / 11 (32-bit and 64-bit) · macOS (current versions) · Linux 2.4 and above. No driver installation required — plug in and the drive is recognized automatically.
2.5" SATA drive (compatible):
Roughly the size of a deck of cards. Has two L-shaped connectors at one end — a narrow 7-pin data connector and a wider 15-pin power connector. Found in laptops as HDDs and as budget/older SSDs.
M.2 drive (not compatible):
Looks like a stick of RAM — a thin rectangular circuit board with a single notch at one end. This is the most common SSD form factor sold today. If your SSD came in a small envelope-style box and is about 22mm x 80mm, it is M.2.
To confirm: look up your drive's model number online. The spec sheet will list the form factor (2.5" or M.2) and interface (SATA or NVMe). If you see "M.2" or "PCIe NVMe" — this adapter is not the right product for your drive.
Will this work with my M.2 SSD?
No. This adapter is for 2.5" SATA drives only. M.2 SSDs — whether NVMe or SATA — are a different physical form factor and use a different connector. You would need an M.2 NVMe enclosure or M.2 SATA enclosure instead.
My laptop only has USB-C ports. Will this work?
The cable has a USB Type-A (USB-A) connector on the computer end. You will need a USB-C to USB-A adapter (not included). These are widely available and inexpensive.
Does it need to be plugged into a wall outlet?
No — it is bus-powered via USB for most 2.5" drives. However, some older or high-capacity 2.5" mechanical HDDs may need more current than a single USB port provides. If the drive fails to spin up, try a powered USB hub or a different USB 3.0 port
Is this compatible with 3.5" desktop hard drives?
No. 3.5" desktop HDDs require 12V power that USB cannot supply. This adapter is for 2.5" drives only.
Can I use this as a boot drive?
Booting from a USB-connected drive is not supported on most systems. This adapter is designed for data transfer, backup, and drive recovery — not as a primary system drive.
Product details
| Main Specification | |
|---|---|
| 制造商 | SABRENT |
| 单位数 | 1 计数 |
| 产品的具体用途 | no |
| 港口数量 | 1 |
| 品牌 | SABRENT |
| 刚果爱国者联盟 | 819921012128 |
| 项目数 | 页:1 |
| 输入电压 | 5 Volts |
| 兼容设备 | Computers with USB port and sufficient power supply |
| 颜色 | 黑色 |
| 电源插件类型 | No Plug |
| 连接器类型 | USB 类型 A |
| 全球贸易识别号码 | 00819921012128 |
| 项目重量 | 1盎司( 1盎司) |
| Technical Details | |
| 完成 | 马特 |
| Item details | |
| 型号 | EC-SSHD |
| Measurements | |
| 项目尺寸 | 5.91 x 5.12 x 1.18 inches |
| Others | |
| 产品类型 | SATA Cables |
| 内建媒体 | User Manual |
| Mfr 部分编号 | EC-SSHD |
| 包件数量 | 页:1 |
| 内建媒体 | User Manual |
| Nominal Power | 2.5 watts |