Nortek GoControl PD300EMZ5-1: Z-Wave Plug-in Dimmer Module 908.42 MHz 120 VAC
3 sold in last 24 hours
- The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).
- This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
- AUTO-SENSE Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on.
- Signal (Frequency): 908.42 MHz Maximum Load: Incandescent: 300W maximum, 120 VAC Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Network wide inclusion One controlled and one pass-through outlet Security beaming POWER REQUIREMENTS 120 VAC, 60 Hz
Tags |
Estimated shipping
Select a product to estimate shipping.The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times). This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). AUTO-SENSE Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on. SPECIFICATIONS Signal (Frequency): 908.42 MHz Maximum Load: Incandescent: 300W maximum, 120 VAC Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Network wide inclusion One controlled and one pass-through outlet Security beaming POWER REQUIREMENTS 120 VAC, 60 Hz
Important information
300 watts
| Main Specification | |
|---|---|
| 制造商 | Gocontrol |
| 单位数 | 1.0 计数 |
| 控制方法 | 触摸 |
| 控制器类型 | Gocontrol |
| 联系人材料 | 铜 |
| 联系人类型 | 通常打开 |
| 操作电压 | 1.2e+2 Volts (Ac) |
| 终端 | 刀锋 |
| 电路类型 | 1号线 |
| 演员类型 | Remote |
| 刚果爱国者联盟 | 601818727563 |
| 项目数 | 页:1 |
| Product information | |
| 软件包尺寸 | 5 X 3 X 3 Inches |
| 项目型号 | Pd300emz5-1 |
| Operation Mode | Manual-Automatic |
| Connector Type | Plug In |
| Technical Details | |
| Color | White |
| Item Weight | 5.4 Ounces |
| Mounting Type | Plug In Mount |
| Wattage | 3e+2 |
| 国际保护评级 | IP00计划 |
| 连接协议 | Z-Wave |
| Brand | Gocontrol |
| Others | |
| 产品类型 | Electronic Switch |