Stud Finder Wall Scanner Wood and Metal Detector Sensor for 3/4 inch Thickness Wall (Yellow)
3 sold in last 24 hours
- Light Indicator and Audio Alarm: ST100B stud finder is equipped with 4 level-flash-light, light up every time a stud edge is approached or be located, in the meanwhile, the beeping will let you know you stop move once you find the edge of wood or metal behind the wall
- Affordable and Accuracy: No more modes you need to learn, just keep it simple. Holding the button, it beeps right away for 2 seconds (it's calibrating), hold it over a non-stud area. When it's done, now you can slide it around to detect (keep holding button) until you find the edge of a stud
- Why You Need eOUTIL Stud Finder: eOUTIL stud detector quickly locates wood, metal and joist hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc. 3/4 Inches Deep Detection for Wood and Metal
- Electrical stud finder: eOUTIL stud finders actively detect differences in wall density to find studs. It uses with a 9v 6F22 battery (Not included) as a power source
- Specification: 5.5 x 2.9 x 1.2 inches; 3.6 oz weight
Tags |
Estimated shipping
Select a product to estimate shipping.What Is A Stud Finder?
As the name suggests a stud finder detects studs behind the surface of a wall.
Detection is achieved using two different methods:
1. Magnetic
Uses powerful magnets to pinpoint the location of screws or nails in a stud. Therefore it doesn't detect the stud itself but rather the hardware that attaches the wall material to the stud.
2. Electronic
Electronic stud finders rely on sensors that detect changes in the dielectric constant (the relative permittivity) of the wall. This changes when the sensor is over a stud. The lower reading indicates the presence of a stud in the wall and the signal will let you know by the colored lights. eOUTIL ST100 stud finder is an electronic style.
How To Use eOUTIL ST100 Stud Finder?
Step 1: Take off the battery cover and load your own 9V 6F22 battery, then ready to go
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1 - 2 seconds). When calibration is complete, the unit will sound a short beep
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4: When the stud finder detects a side of object, it will beep continually and flashing the lamp, mark this place with a pen, keep moving to find another side, mark again.
Stud-Finding Tips: Don’t touch the wall with either hand while you’re using a stud finder—this can alter its readings.
How to load your own 9V 6F22 battery?
Product details
| Main Specification | |
|---|---|
| 制造商 | eOUTIL |
| 单位数 | 1 计数 |
| 项目维度L x W x H | 2.56"L x 1.57"W x 1.57"H |
| 显示类型 | LED/Beeping |
| 品牌 | Eoutil |
| 刚果爱国者联盟 | 786118036321 |
| 项目数 | 页:1 |
| 建议产品用途 | 金属检测 |
| 电源 | 电池 |
| 材料 | 塑料 |
| 颜色 | 黄色 |
| 项目重量 | 3.2盎司(3盎司) |
| Product information | |
| 电池类型 | 9V |
| Operating Frequency | 10 KHz |
| Technical Details | |
| 制造商部分编号 | ST100 |
| 需要电池吗? | Yes |
| 材料类型 | 塑料 |
| 国际保护评级 | 第54条 |
| Item details | |
| 型号 | 第100号 |
| Others | |
| 产品类型 | Stud Finders |