Kerry 2-1/2" O.D. PVC Pipe Cutter, Heavy-Duty Ratcheting Cutting Tool
13 sold in last 24 hours
- Wide Cutting Range - Up To 2-1/2" Outer Diameter: Handles PVC, CPVC, PEX, PP, PE, rubber hose, and multilayer tubing up to 2-1/2" (63mm) outer diameter. Compatible with standard Schedule 40 PVC in sizes 1/2" through 2". Not designed for Schedule-rated 2-1/2" pipe (which has an OD larger than 2-1/2"). Covers the full range of common home plumbing, irrigation, and HVAC tubing in a single tool.
- 3cr13 Self-Sharpening Blade – Stays Sharp The More You Use It: The hardened 3CR13 stainless steel blade is engineered with a self-sharpening geometry — the cutting edge refines itself with each correct squeeze, so performance improves over time rather than declining. Unlike coated SK5 blades, it won't develop surface chips or coating flakes after extended use. Delivers clean, burr-free cuts from the first pull to the hundredth.
- 11-Inch Extended Handle – 14% More Leverage Than Standard Cutters: At 11 inches long — over 1.3 inches longer than typical 9.6-inch ratchet cutters — the handle gives you measurably more mechanical advantage on thick-walled pipe. The 1.2-inch thick aluminum body resists flex under pressure. The textured EVA non-slip grip increases friction and prevents hand slippage, even in wet or tight-clearance conditions.
- 3mm Thickened Aluminum Body – Built For Frequent, Heavy Use: The body and all connection joints are machined from 3mm thick aluminum alloy — thicker than most competitors — for a rigid, flex-free cut cycle. No plastic components in the structural load path. Rust-resistant finish protects the tool in damp environments. Designed to last through years of professional plumbing, HVAC, and irrigation work.
- One-Hand Ratchet Operation + Safety Latch Included: Open latch → place pipe perpendicular to blade → squeeze and fully release handle → repeat until cut is complete. The ratchet mechanism advances the blade incrementally, so you never need full grip strength in a single pull. Close the safety latch when not in use to protect the blade and prevent accidents. Tip: in cold weather, warm the pipe briefly with hot water before cutting to prevent cracking.
Tags |
Estimated shipping
Select a product to estimate shipping.Please make sure that the pipe is perpendicularto the blade before cutting,as ithelps toensure cut the pipestraight.
As a low temperature may make some plasticpipesfragile,using hot water or a hairdryer towarm the pipe before cutting willbehelpfulfor cutting.
Can this cut Schedule 40 PVC pipe?
Yes. Schedule 40 PVC in sizes 1/2"–2" all have ODs under 2-1/2" and are fully compatible. It cannot handle Schedule-rated 2-1/2" pipe, which has an OD of ~2.875".
What is the minimum pipe size?
There is no minimum diameter limit; however, if the diameter is particularly small, I would recommend purchasing our other two sizes—they would be a better fit.
Will the blade stay sharp over time?
The 3CR13 blade has a self-sharpening geometry — performance improves with correct use. Replacement blades are available separately
Can it cut copper or steel pipe?
No. For plastic pipe only: PVC, CPVC, PEX, PP, PE, rubber hose, and multilayer tubing. Use a wheel-type cutter for metal pipe.
Why is the handle longer than others?
At 11 inches (vs. standard 9.6"), the longer handle provides more leverage and reduces hand strain, especially on thick-walled pipe. And the grip is symmetrical and works equally well in either hand.
Product details
| Main Specification | |
|---|---|
| 制造商 | Kerry |
| 品牌 | Kerry |
| 项目包数量 | 页:1 |
| 电源 | 手动 |
| 产品尺寸 | 10.83 x 1.18 x 4.72 inches |
| 材料 | 铝 |
| 颜色 | 橙红色 |
| 大小 | 2/1/2” |
| 项目重量 | 1.39镑 |
| Product information | |
| 项目型号 | JH202404 |
| Technical Details | |
| 编 号 | JH202404 |
| Others | |
| 第一次可用日期 | 2024 (英语). or 1月11日,纽约 |
| 产品类型 | 管道切割器 |