Blue Sea Systems 5056100 ST Blade Water-Resistant Fuse Block, Manual Cover, 80 Amps
15 sold in last 24 hours
- Water-resistant design with standard ring or spade type terminals allow for simple wiring with standard tools
- Includes three wire plugs to maintain water-resistant rating if less than four loads are required
- Accepts ATO and ATC fast acting blade fuses and Low Profile Circuit Breakers
- Nests with other ST-Blade water-resistant fuse blocks and water-resistant 100A busbars to reduce wire
- Tin-plated copper buses and fuse clips
Estimated shipping
Select a product to estimate shipping.Provides water-resistant circuit protection for ATO/ATC fuses & circuit breakers in a compact footprint. Fuse Blocks are an effective method of protection to prevent damage to wiring and possible fire in the event of an over-loaded or short circuit. This Blue Sea Systems space-saving fuse block can provide protection for new installations or when the panel has run out of breakers. Often used for electronic installations, these fuse blocks can be fed by one breaker from the distribution panel and supply power to four additional circuits. Terminals are located on one side to concentrate wiring and minimize the overall footprint of the fuse block. A clear cover insulates fuses and terminals from accidental contact and satisfy ABYC and USCG requirements.
ST-Blade Fuse Blocks
Consolidates branch circuits and in-line fuses
The ST Blade Fuse Block was designed with fastener terminals to comply with ABYC Recommended Practices, and are built with tin-plated copper components for improved conductivity and lower operating temperatures. An optional cover protects the conductive surfaces from accidental shorting, labels each circuit, and stores spare fuses.
The ST Blade Fuse Block is ideal for use as a sub-panel in the DC distribution system. This solves the problem of using large and expensive circuit breaker panels as circuit protection for electronics and other branch circuits. With most circuit breaker panels a circuit breaker and an inline fuse are used for to protect electronic devices. By instead utilizing Blue Sea Systems ST Blade Fuse Block as a sub-panel, fuses more appropriate for electronics can be used, removing the need for inline fuses while only utilizing one position on the panel. This reduces the size of the panel needed and lowers the overall system cost.
Independent and/or Common Source fuse block
Fastener terminals for securing wires accept terminal rings
One-piece stainless flange nuts ensure safe and secure connections
Clear insulating cover with label recess satisfies ABYC/USCG insulation requirements
Accepts ATO and ATC fast acting blade fuses (sold separately)
Some models ignition protected or ingress protected
Product details
| Main Specification | |
|---|---|
| 包含的组成部分 | Fuse Block or (4) write on circuit labels |
| 材料 | 塑料 or Tin-plated Copper |
| 制造商 | 蓝海系统 |
| 单位数 | 1 计数 |
| 尺寸 L x W x H | 4.96 x 3.4 x 2.1 inches |
| 规格 | Abyc/Uscg |
| 当前评分 | 80 A |
| AC 适配器当前 | 25 A |
| 品牌 | 蓝海系统 |
| 刚果爱国者联盟 | 632085505615 |
| 项目数 | 页:1 |
| 电压 | 32 volts_of_direct_current |
| 颜色 | 黑色 |
| 挂载类型 | 螺丝山 |
| 项目重量 | 6.72盎司 |
| Technical Details | |
| 材料类型 | 塑料 or Tin-plated Copper |
| 编 号 | 5056100-BSS |
| 型号 | 5056100 |
| Item details | |
| 项目类型名称 | boating-electrical-equipment |
| Measurements | |
| 项目尺寸 | 4.96 x 3.4 x 2.1 inches |
| Others | |
| 产品类型 | boating-electrical-equipment |
| 最大当前 | 25 A |